- Humidifiers Specification
- Humidifiers Features
Humidifiers Specification
- Power: 120 Volt
- Input: 50/60Hz, Max 27 Watt
- Fog outlet: Max380ml/hr
- Size: 4L/1gal
Note:We recommend USE PURE WATER.①Do not use extremely cold water or water over 40°C as it may damage the humidifier.
②The humidifier can be used continuously for 7-12 hours after being filled with water. ③Reptile Humidifier Fogger Terrariums Snake humidifier Enclosure Supplies,
Reptile Mister for Vivarium, Humidifier for Grow Tent Plants Humidifiers Features
- 4L Water Capacity & Max Fog Output】: The reptile humidifier is equipped with a 4-Liter water tank, with adjustable fog output of up to 380ml per hour.
- Dry-out Protection】: The reptile fogger will stop working when it runs out of the water(detected by a white buoy), and the indicator light will turn red.
- Extendable Hose】:An extendable hose, from 25.2 inches~68.5 inches, and 2 suction cups, are come together with this Humidifier.
- Anti-leaking Design】:
The water tank of the humidifier is detachable and would not leak when it is departed.
Basic Operations1. Place the humidifier on a appropriate surface.
2. Fill the water tank with clean water(See Filling The Water Tank below for more details).
3. Plug in the humidifier to a 110-220V power source.
4. Rotate the Fog Volume Regulator to turn on the humidifier and adjust the mist level, the indicator light will turn green when the humidifier is powered on.
5. The indicator light will turn red if the tank is out of water.
- WiFi Controller Features:
- Controller Specification:
WiFi Controller Features:
Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the INKBIRD app at any time anywhere
Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac). Humidity measurement range: 10 - 99% RH. Relative humidity accuracy: +/- 3% RH - +/ - 5% RH
Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection.
Controller Specification:
Humidity Sensor
- Humidity Measure Range: 5%-99.99%RH
- Humidity Control Range : 5%-99%RH
- Accuracy: ±3%RH
- Resolution: 1%RH
- Sensor Length:6.56ft (2m)
Solid Sockets
- Power Output: Max. 10A, 100V ~240V AC
- Work 1:To control humidifier
- Work 2:To control dehumidifier
- Socket: 3.3x1.7x1inch (85x42x24mm)
- High/ Low Humidity Alarm: Set a High/ Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone
- Humidifiers Specification
- Humidifiers Features
Humidifiers Specification
- Power: 120 Volt
- Input: 50/60Hz, Max 27 Watt
- Fog outlet: Max380ml/hr
- Size: 4L/1gal
Note:We recommend USE PURE WATER.①Do not use extremely cold water or water over 40°C as it may damage the humidifier.
②The humidifier can be used continuously for 7-12 hours after being filled with water. ③Reptile Humidifier Fogger Terrariums Snake humidifier Enclosure Supplies,
Reptile Mister for Vivarium, Humidifier for Grow Tent Plants Humidifiers Features
- 4L Water Capacity & Max Fog Output】: The reptile humidifier is equipped with a 4-Liter water tank, with adjustable fog output of up to 380ml per hour.
- Dry-out Protection】: The reptile fogger will stop working when it runs out of the water(detected by a white buoy), and the indicator light will turn red.
- Extendable Hose】:An extendable hose, from 25.2 inches~68.5 inches, and 2 suction cups, are come together with this Humidifier.
- Anti-leaking Design】:
The water tank of the humidifier is detachable and would not leak when it is departed.
Basic Operations1. Place the humidifier on a appropriate surface.
2. Fill the water tank with clean water(See Filling The Water Tank below for more details).
3. Plug in the humidifier to a 110-220V power source.
4. Rotate the Fog Volume Regulator to turn on the humidifier and adjust the mist level, the indicator light will turn green when the humidifier is powered on.
5. The indicator light will turn red if the tank is out of water.
- WiFi Controller Features:
- Controller Specification:
WiFi Controller Features:
Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the INKBIRD app at any time anywhere
Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac). Humidity measurement range: 10 - 99% RH. Relative humidity accuracy: +/- 3% RH - +/ - 5% RH
Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection.
Controller Specification:
Humidity Sensor
- Humidity Measure Range: 5%-99.99%RH
- Humidity Control Range : 5%-99%RH
- Accuracy: ±3%RH
- Resolution: 1%RH
- Sensor Length:6.56ft (2m)
Solid Sockets
- Power Output: Max. 10A, 100V ~240V AC
- Work 1:To control humidifier
- Work 2:To control dehumidifier
- Socket: 3.3x1.7x1inch (85x42x24mm)
- High/ Low Humidity Alarm: Set a High/ Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone
On Jul 18, 2025 at 03:35:20 PDT, seller added the following information: